manualshive.com logo in svg

Ford Ranger 2012, Owner'S Manual

Share
Download
Ford Ranger 2012 Owner'S Manual Download Page 106

•

Apply the parking brake.

•

Open any door.

•

Drive off uphill without re-applying the
brake.

•

Wait for one to two seconds after you
remove your foot from the brake pedal.

•

If the system is active in a forward gear,
select reverse gear.

•

If the system is active in neutral,
release the clutch pedal (Manual
transmission).

•

If the system is active in reverse gear,
select neutral.

Switching the System On and Off

Note:

You can only switch the system on

and off if your vehicle has a manual
transmission.

Note:

The system will remain on or off

depending on how it was last set.

Your vehicle comes with this feature
already enabled. If required, you can switch
this feature off using the information
display. See 

General Information

 (page

58).

104

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Brakes

Summary of Contents for Ranger 2012





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands