Ford Ranger 2012 Owner'S Manual Download Page 128

Page: 128 / 276

Removing the tow ball arm

E137326

Push the lever towards the center of
the vehicle.

2. Turn the lever counterclockwise to

unlock the tow ball arm.

3. Remove the tow ball arm.

4x2 (vehicles with increased ride
height) and 4x4

E139242

Tighten the bolts to 218 ± 42 Nm.

Driving without a trailer

Remove the tow ball arm.

2. Install the plug into its seat.

WARNINGS

To avoid risk of injury, never unlock
the tow ball arm with the trailer
attached.

Remove the tow ball when driving
without a trailer.

Maintenance

Keep the system clean.

Periodically lubricate the tow ball
mechanism with resin-free grease or oil
and the lock with graphite.

TOWING POINTS

E175459

Front towing eye

TOWING THE VEHICLE ON
FOUR WHEELS

All Vehicles

WARNINGS

Switch the ignition on when towing
the vehicle.

126

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Towing

Summary of Contents for Ranger 2012





















































































































































































































































































Search results

Summary of Contents for Ranger 2012

Reviews:

Ford Ranger 2012, Owner'S Manual, Page: 128 / 276

Search results

Summary of Contents for Ranger 2012

Reviews: