manualshive.com logo in svg

Ford Ranger 2012, Owner'S Manual, Page: 252 / 276

Share
Download
Ford Ranger 2012 Owner'S Manual Download Page 252

You Can

When You Select

Store and name your current position. This will automatic-
ally save in your favorites.

Store position

Set your route options from the available list.

Route options

Select GPS and system information or a demonstration
of the system functionality.

Special functions

Select a demonstration mode where the system will
simulate a journey whilst the vehicle is stationary. You can
manually select a vehicle start position.

Press the MENU button, select the navigation option and choose any of the
following options.

You Can

When You Select

Set your route options.

Route options

Customize the map display for your journey (for example
arrows on map, arrival times and map content).

Map display

Customize display information for your journey (for
example signs, lanes and speed limits).

Assistance options

Turn the hazard warning feature on or off.

Delete personal data (for example your home address).

Personal data

Reset the navigation settings.

Reset all settings

Storing Your Home Address

1.

Press the 

NAV

 button.

2. Select the home address option.

3. Enter the required details using the

arrow buttons.

4. Press the confirm function button.

Note:

Your last destination will

automatically display if you go to change
your home address.

Adding a Favorite

1.

Press the 

NAV

 button.

2. Scroll to the destination input option.

3. Enter the required details using the

arrow buttons.

4. Press the store function button.

Note:

If you select store position, this will

also save the destination in your favorites.

Selecting a Favorite

1.

Press the 

NAV

 button.

2. Select the favorites option.

3. Scroll to the required destination using

the arrow buttons.

4. Press the 

OK

 button to start

navigation.

250

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Navigation

Summary of Contents for Ranger 2012





















































































































































































































































































Reviews:

No comments