manualshive.com logo in svg

Ford Ranger 2012, Owner'S Manual, Page: 74 / 276

Share
Download
Ford Ranger 2012 Owner'S Manual Download Page 74

Removing the Head Restraints

Front Head Restraints

E140447

2

1

Press locking button 1 and at the same
time release the retaining clip 2 using a
suitable implement.

Rear Outermost Head Restraints

E151804

Pull to move the head restraint upward.
Press the locking button 1 to lower the
head restraint or to remove the head
restraint.

Installing the Head Restraints

Align the stems with the guide sleeves and
push the head restraint downward. Make
sure the head restraint locks into place.

MANUAL SEATS

WARNINGS

Use accessory seat covers designed
for seats with side airbags. Have
these fitted by an authorized dealer.

Do not adjust the driver seat when
your vehicle is moving.

Note:

The seat covers fitted to your vehicle

as part of a special equipment pack are
washable without removing them from the
seats.

Note:

The seat covers are designed to work

with the seat's existing features and safety
systems, and should not require adjustment.
If seat cover removal and installation is
required, see an authorized Ford dealer.

Moving the Seat Backward and
Forward

WARNING

Make sure the seat fully locks into
place by rocking it backward and
forward.

72

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Seats

Summary of Contents for Ranger 2012





















































































































































































































































































Reviews:

No comments