manualshive.com logo in svg

Ford Ranger 2012, Owner'S Manual

The Ford Ranger 2012 Mounting Manual is a comprehensive guide that provides step-by-step instructions on how to properly install various components of the vehicle. This manual is available for free download from our website, ensuring convenient access to the valuable information needed for hassle-free installation.

Share
Download
background image

P
R

N

D

S

-

+

E136209

To exit SelectShift mode, return the
selector lever to drive (D).

When your vehicle is stationary, only the
1st and 2nd gears can be selected. Manual
shifting is sequential, therefore gears
cannot be skipped.

Emergency Park Position Release
Lever

WARNINGS

Do not drive your vehicle until you
verify that the brake lamps are
working.

When doing this procedure, you need
to take the transmission out of park
(P) which means your vehicle can

roll freely. To avoid unwanted vehicle
movement, always fully apply the parking
brake prior to doing this procedure. Use
wheels chocks if appropriate.

If the parking brake is fully released,
but the brake warning lamp remains
illuminated, the brakes may not be

working properly. Have your vehicle
checked as soon as possible.

Note:

For some markets this feature is

disabled.

Your vehicle has a brake-shift interlock
feature that prevents moving the gearshift
lever from park (P) when the ignition is on
and you do not press the brake pedal.

The system requires service if you cannot
move the gearshift lever out of park (P)
with the ignition on and the brake pedal
pressed. It is possible that a fuse has blown
or your vehicle’s brake lamps are not
operating properly.  See 

Fuse

Specification Chart

 (page ?).

If the fuse is not blown and the brake
lamps are working properly, the following
procedure allows you to move the selector
lever from park (P):

Note:

Apply the parking brake and switch

the ignition off before performing this
procedure.

E132721

1.

Lift up the cover in the center console
next to the transmission selector lever
with a suitable tool.

2. Push down the locking button in the

slot and simultaneously move the
selector lever out of park (P) and into
another gear.

94

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Transmission

Summary of Contents for Ranger 2012





















































































































































































































































































Reviews:

No comments

Related manuals for Ranger 2012

Panasonic SL-SX451C Operating Instructions preview
SL-SX451C
Brand: Panasonic Pages: 2
Panasonic CYRC50U - UNIVERSAL REAR-VIEW CAMERA Manual De Instrucciones preview
CYRC50U - UNIVERSAL REAR-VIEW CAMERA
Brand: Panasonic Pages: 20
Panasonic CF-WEB Series Setting Manual preview
CF-WEB Series
Brand: Panasonic Pages: 12
JANE MICRO Quick Start Manual preview
MICRO
Brand: JANE Pages: 6
Edelbrock For 1985-1992 GM Cars and Trucks 17933 Installation Instructions preview
For 1985-1992 GM Cars and Trucks 17933
Brand: Edelbrock Pages: 4
TATA Motors Indigo MANZA QUADRAJET 90 Owner'S Manual & Service Book preview
Indigo MANZA QUADRAJET 90
Brand: TATA Motors Pages: 10
UGREEN Car Cup Holder Phone Mount Manual preview
Car Cup Holder Phone Mount
Brand: UGREEN Pages: 9
Audiovox Code Alarm PROFESSIONAL SERIES CA 5550SST Owner'S Manual preview
Code Alarm PROFESSIONAL SERIES CA 5550SST
Brand: Audiovox Pages: 14
BrandMotion FLTW-7690 Installation Instructions preview
FLTW-7690
Brand: BrandMotion Pages: 2
Prorack K544 Fitting Instructions Manual preview
K544
Brand: Prorack Pages: 20
AIS MAZMOD2 Manual preview
MAZMOD2
Brand: AIS Pages: 2
Mercedes-Benz 240 D 1979 Owner'S Manual preview
240 D 1979
Brand: Mercedes-Benz Pages: 91
Skoda Fabia Combi 5J Fitting Instructions preview
Fabia Combi 5J
Brand: Skoda Pages: 2
Dhollandia DH-RB 05.02 Series User Manual preview
DH-RB 05.02 Series
Brand: Dhollandia Pages: 65
Guardsman G14776S Fitting Instruction preview
G14776S
Brand: Guardsman Pages: 2
Nugent Tipper Remote Kit User Manual preview
Tipper Remote Kit
Brand: Nugent Pages: 21
Alfa Romeo Stelvio 2019 User Manual preview
Stelvio 2019
Brand: Alfa Romeo Pages: 268
Ford 2006 F-250 Owner'S Manual preview
2006 F-250
Brand: Ford Pages: 312

Brands by name

Popular brands

Load more brands