Ford Ranger 2012 Owner'S Manual Download Page 184

Page: 184 / 276

Dimension in mm

(inches)

Dimension Description

Item

5359 (211.0)

Maximum length

5434 (214.0)

Maximum length - with bull bars

1850 (72.8)

Overall width - excluding exterior mirrors

1716 (67.5)

Overall height (4x2)

1815-1848 (71.4-72.8)

Overall height (4x2

or 4x4)

3220 (126.8)

Wheelbase

1590 (62.6)

Track - front and rear (4x2)

1560 (61.4)

Track - front and rear (4x2

or 4x4)

Depending on tyre size

Vehicles with increased ride height

VEHICLE IDENTIFICATION
PLATE

E85610

Vehicle identification number.

Gross vehicle weight.

Gross train weight.

Maximum front axle weight.

Maximum rear axle weight.

The vehicle identification plate with your
vehicle identification number and
maximum weights is located on the
bottom of the lock side of the passenger
door aperture.

VEHICLE IDENTIFICATION
NUMBER

The vehicle identification number is on the
left-hand side of the instrument panel.

182

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Capacities and Specifications

Summary of Contents for Ranger 2012





















































































































































































































































































Search results

Summary of Contents for Ranger 2012

Reviews:

Ford Ranger 2012, Owner'S Manual, Page: 184 / 276

Search results

Summary of Contents for Ranger 2012

Reviews: