4
OPERATION
Seats and Beds
DRIVER SEAT
PASSENGER SEAT
1- Seat inclination adjustment:
Inclination of the seat can be adjusted between 2° and 12°.
YES
N/A
2- Shock absorber adjustment:
Shock absorbers can be set in 4 positions from soft to hard
with the adjustment button. Absorbers are adjusted to a softer setting when the button is
pulled up and a harder setting when the button is pushed down.
YES
N/A
3- Height adjustment:
You can adjust the height up and down for 100 mm without any step
restriction.
YES
N/A
4- Rapid lowering:
Makes getting in and off the vehicle easier. When the driver pulls up
the button while he is getting off the vehicle, seat is lowered to the bottom position (by the
discharging of air). When the driver gets back in the vehicle, he should push down the button
to charge the air bellows of the seat foresetting the seat to the driving position. If the seat is
used without air charge, this would damage the internal mechanism of the seat and render
the seat out of warranty cover.
YES
N/A
5- Seat backrest inclination adjustment:
Lean on the seat backrest. Pull the lever up,
bring the backrest to the desired position and release the lever.
YES
YES
6- Fore and aft adjustment:
It is possible to adjust the seat to fore and positions with steps
of 10 mm within a limit of 210 mm.
YES
YES
79
Summary of Contents for Cargo 2017
