4
OPERATION
Opening and closing of the vehicle
Windows
1- Driver side window regulator button
2- Passenger side window regulator button
Window moves to opening or closing direction
while the opening/closing buttons are pressed.
Operation is stopped automatically when the
window reaches uppermost or lowermost
position.
Buttons are active while the ignition is on and
for an additional 30 seconds after the ignition
is turned off.
Quick Window Raising
Window is closed automatically when the
window closing button is pressed once for a
short time.
If jamming is detected while raising the
windows, power windows are opened again to
a specified level.
CAUTION
If the window is jammed thrice in a row while
quick closing, window quick raising feature is
deactivated.
Window learning procedure shall be started
when the doors are closed and lock is open.
First, bring the window half way or at least one
quarter closed position.
Then lower the window to the bottom level and
press the button until flasher signal is received.
When the flasher signal is received, bring the
window to the top level with a single press
and hold the button until off/on feedback is
received from the locks.
Window learning operation shall be performed
separately for driver window and passenger
window.
These operations shall not be performed
together.
Quick Window Lowering
When the on/off switch is pressed down for
a short time and released, quick lowering
feature is activated, and windows are lowered
completely automatically.
69
Summary of Contents for Cargo 2017
