CONTROLS AND INDICATORS
3
Setting the activities
Driving duration (automatic during
cruise)
All other operation durations
Watch durations (waiting durations,
assistantship duration, sleeping dura-
tion for the 2nd driver during cruise)
Break times and resting periods
► Manual setting
Activity can be set only when the vehicle
is in parking position
1. For the driver driving the vehicle, press
1st driver activity button;
2. Press the button until desired
activity (1) is displayed on the display.
Approximately 5 seconds later the previ-
ous indicator is displayed
3. For the assistant driver, press 2nd
driver activity button;
► Automatic setting
DTCO 1381 tachograph automatically passes
the activity below:
Vehicle...
1. Driver
2. Driver
During
cruise
During park
state
A
Definitely set the activity at the end of the
shift or during a break. This way, it is
ensured that VDO Counter makes * reli-
able calculations.
► Automatic setting upon ignition on/off *
DTCO 1381 tachograph can switch to a de-
fined activity after the ignition is turned on/off,
for example
After the ignition is turned on or off, the
automatically changing event (1) and/or (2) is
displayed on standard indicator (a) and flashed
for approximately 5 seconds. Then the previ-
ous indicator is displayed.
Activities flashing in standard indicator (a)
When required, change the set activity
in accordance with the activity you are
executing at the moment.
Tachograph
51
Summary of Contents for Cargo 2017
