MAINTENANCE AND SERVICE
5
Questions and Remedies
FAULT
CAUSE AND REMEDY
OIL PRESSURE LOW
Oil pressure indicator is blocked or faulty. Have them inspected.
Oil filter element is clogged. Replace.
Oil strainer is blocked. Clean it.
Oil pump is faulty. Check the backlash, drive shaft and operation of safety valve.
POWER STEERING
NOISE IN STEERING
WHEEL
Hydraulic oil level is low, top it up and bleed the system.
STEERING WHEEL IS
ROTATING ROUGHLY
PLAY IN STEERING
WHEEL
Check for looseness in the steering system. Also have the adjustment inspected in an authorized dealership.
ENGINE DOESN’T
PRODUCE POWER
Engine is faulty. Drive to an authorized dealer to resolve the fault.
Exhaust or intake manifold is loose. Drive to an authorized dealer.
Wrapping on turbine shaft bearings. It shall be repaired.
Turbo pressure may be lower than necessary. You are recommended to contact nearest FORD OTOSAN
authorized dealership.
Drive to an authorized dealer and have the necessary inspections performed.
Check the tire pressure. Vehicle maybe overloaded. Check the suitability of
load capacity. If load limits are not exceeded, drive to an authorized dealer.
Check the tire pressure and wheel alignment.
225
Summary of Contents for Cargo 2017
