MAINTENANCE AND SERVICE
5
WARNING
Your wheel is specially polished and covered
with a transparent protection layer to protect
its brightness. Never re-polish. This polishing
operation would damage the protective layer
on the surface. On vehicles with aluminium
alloy wheels, wheel but caps shall be removed
with the wheel nut cap pliers delivered with the
tools before removing the wheel nuts.
WARNING
Please, observe the prescribed tire pressure
for your vehicle.
Very low tire pressure may cause blow-out of
the tire at high speeds and loads.
You can cause an accident and thus injuries to
others due to this.
CAUTION
Use snow chains only on the outer tyres of
your vehicle.
Remove the wheel nut caps with the special
pliers provided in the toolbox of the vehicle for
aluminium alloyed wheels.
Do not attempt to remove with sharp objects
such as screwdrivers etc.
Check the tire pressure periodically to prevent
irregular tire wear.
Over inflated
Deflated
Proper Tire
Pressure
Low pressure cause wear on the shoulder
areas of the tire. High pressure cause wear on
the back areas of the tire.
WHEEL ALIGNMENT CHART
MIN.
MAX.
Caster
2° 42´
5° 18´
Camber
- 0° 30´
+ 0° 30´
Total toe-in
0,0mm
+ 1,7mm
Tires and Rims
181
Summary of Contents for Cargo 2017
