Ford Cargo 2017, Owner'S Manual

Page: 172 / 240

5
MAINTENANCE AND SERVICE
Greasing (for 5th wheels of JOST brand)
At every 10,000 km:
Apply grease from the grease fitting on
the side of the 5th wheel (platform) without
detaching the trailer. Every 50,000 km for
vehicles used in normal operating conditions
Every 25,000 km for vehicles used in heavy
operating conditions Detach the semi-trailer.
Remove the grease on 5th wheel (platform)
and king pin. Apply grease to the areas
shown with yellow color on the illustration.
WARNING
Attach the cables in such a manner that the
pressure air and hydraulic hoses are not
tense, they are not bent or rubbing and
the canopy can easily follow the trailer in
curves, etc.
Pay attention to the voltage of the consumers on
the canopy/trailer before connecting the cable.
A 15 – 15 pin connector shall be used in
vehicles with ADR
Contact Authorized Workshop when you want
to install Trailer Axle Lifting function on the
vehicle.
WARNING
Upper part of the live axle fender with 3 parts
is advised for operation without trailer.
The upper part shall be removed when the
vehicle is operated with trailer and during the
removal/installation manoeuvres of the trailer
to the vehicle.
FORD OTOSAN will not be responsible for any
damages to occur in the upper part during use
with a trailer.
WARNING
In tractor vehicles, the distance between lower
side of the stop lamp on the rear left fender
and upper side of the license plate's sheet
plate should be 40 mm.
Attaching and Detaching a Trailer
170