CONTROLS AND INDICATORS
3
► Country input during manual input
• In the first input field select
Final
country" symbol and confirm (Only possible
when the first manual input time does not
overlap with the country input time when
the card is last removed.)
• Select and confirm the country.
Or:
Country selection
Last selected country is displayed first. Then
the last input four country is displayed with /
buttons Marking: The colon in front of country
mark ":B"
The rest of the selection starts from letter "A"
and continues alphabetically:
•
A, Z, Y, X, W, ... etc with button
•
A, B, C, D, E, ... etc with button
When the button is pressed the
menu flows faster (automatic repetition func-
tion)
► Cancelling the input procedure
When there is no input in the input procedu-
re, the following indicator is displayed in 30
seconds
If the
button is pressed in the following 30
seconds, you can continue the input operation.
At the end of this duration, or when driving
starts; reading of the driver card is completed
and standard display (a) is shown.
Version 2.1:
inputs confirmed with but-
ton are recorded in DTCO 1381 tachograph.
Version 2.2:
Be sure that the data is confir-
med, otherwise entered data shall not be re-
corded. This is also the case when the data is
entered remotely or directly into DTCO 1381.
Manual input cancellation with driver card
request.
•
Select Start, country" symbol and confirm.
• Select and confirm the country.
Tachograph
47
Summary of Contents for Cargo 2017
