4
OPERATION
Power Take Off
Illustration is for informational purposes only. There
are no adaptors or pumps on the vehicle.
PTO is the unit connected to the transmission
to operate the equipment that will be operated
by taking power from the transmission (such
as pumps). It transmits the power it takes from
the transmission to the pump.
PTO installation is optional and can be perfor-
med on both manual and automated transmis-
sions during production in the factory.
Contact a Ford Cargo authorized dealership
for the retrospective PTO installations.
Engine electronic control unit on your Ford
Cargo vehicles allows that the engine is ope-
rated at a constant speed when PTO is activa-
ted. Speed parameter on the control unit may
be set by the Ford Cargo authorized dealers.
PTO on Vehicles with Manual Transmission
Operating speed can be 2 different speeds
according to the half gear latch on the shift
lever. Set the half gear latch up or down
before activating PTO. Do not tamper with the
latch while PTO is operated.
Pump shall operate with higher speed when
the latch is up, and with lower speed when the
latch is down.
Activating the PTO
• Stop the vehicle and apply the parking brake.
• Shift to neutral, set the engine to idle
• Depress the clutch pedal and hold it pres-
sed.
• 10 seconds later, press the
switch on
the center console. Yellow light on the switch
shall be illuminated.
• Take your foot off the clutch pedal.
Deactivating the PTO
• Fully depress the clutch pedal for 10 se-
conds without taking your foot off (on vehicles
with clutch pedal)
• Press the
switch on the center conso-
le, yellow light shall be turned off.
• Take your foot off the clutch pedal (on vehic-
les with clutch pedal).
PTO on Vehicles with Automated
Transmission
• PTO can only be activated when the vehicle is
stationary and rotating knob is at position "N".
PTO is activated by pressing the PTO on the
console.
• Shifting is not possible when PTO is
activated and vehicle is moving.
• PTO cannot be activated when the vehicle
is moving.
Power take off
135
Summary of Contents for Cargo 2017
