CONTROLS AND INDICATORS
3
Removing driver cards
1.
Switch on the ignition.
(* required only in ADR model)
2.
Set the appropriate activity; for exam-
ple set as
at the end of the shift.
3.
Remove the card from the card slot 1
or card slot 2 it is inserted in;
Following operations are directed over
the menu,
When the printer drawer is open, it is
prevented to remove card slot no 2!
The usage warning below shall direct
your attention to this.
Card request during manual input
1.
Remove the card from the card slot 1
or card slot 2 it is inserted in;
2.
Select "No" for the following questions
and confirm.
3. Continued
Manuel input is cancelled, DTCO 1381
tachograph records "?" activity for an unknown
duration.
A
As a rule, the driver card can remain in the
card slot at the end of the shift - please set
activity.
But during driver or vehicle exchange,
driver card must be removed from the card
slot.
You can remove the driver card from
the card slot only while the vehicle is in
parking position!
Removing the driver card
Card is ejected when you close the printer
drawer.
Tachograph
57
Summary of Contents for Cargo 2017
