Fluke NORMA 4000 Operators, User Manual, Page: 53 / 184

Remote Control - Description of Commands
Measurement Functions
4
4-5
Measurement Functions
The <function> is hiearchical measurement function indicating the type of averaged
electrical quantity the instrument will be configured to measure. One value of <function>
is calculated over one averaging cycle of the instrument. When using the
[SENSe:]FUNCtion subsystem, multiple functions can be measured/calculated
concurrently. The <function> has the following syntax:
<function> ::=“<function_name>”
If used with [SENSe:]FUNCtion subsystem, the <function_name> is STRING
PROGRAM DATA, ie. the function_names are enclosed in double quotes. If multiple
functions are specified, each function_name must be enclosed in quotes.
Example:
FUNC “VOLT1:DC“ Measure True RMS on phase 1
FUNC “VOLT1:AC“, “VOLT2:AC“,
“VOLT3:AC“
Measure RMS on phases 1, 2 and 3
When a <function> is returned in response to a query, it contains no white space. The
mnemonics in the query response uses short form with default nodes omitted. All alpha
characters in the response are in uppercase.
The first node of the function_name has an integer numerical suffix that is used to
distinguish among phases of a multiphase system. See the list of the valid suffixes below.
Suffix Phase
1 L1
2 L2
3 L3
4 L4 of the NORMA 5000 model
5 L5 of the NORMA 5000 model
6 L6 of the NORMA 5000 model
12 ph2ph voltage L1 - L2
13 ph2ph voltage L1 - L3 (W2 system only)
23 ph2ph voltage L2 - L3
31 ph2ph voltage L3 - L1 (W3 system only)
45 ph2ph voltage L4 - L5 (N5000 model)
56 ph2ph voltage L5 - L6 (N5000 model)
64 ph2ph voltage L6 - L4 (N5000 model)
No suffix Average/Total/Overall value from channels of 1st 3-phase system (phase 1 … phase 3) or
1st 2-phase system (phase 1 ... phase 2) when two-wattmeter (2W/Aron) configuration is
active.
460 Average/Total/Overall value from channels of 2nd 3-phase system (phase 4 … phase 6).
123 Average phase-to-phase voltage of 1st 3-phase system (phase 1 … phase 3) or 1st 2-phase
system (phase 1 .. phase 2) when two-wattmeter (2W/Aron) configuration is active.
456 Average phase-to-phase voltage of 2nd 3-phase system (phase 4 … phase 6).