Fluke NORMA 4000 Operators, User Manual, Page: 33 / 184

Status Reporting System
Description of Status Registers
2
2-9
Table 2-4. STATus:QUEStionable Register Bits
Bit No. Description
0 QUEStionable:VOLTage Register Summary.
1 QUEStionable:CURRent Register Summary.
2 to 4 These bits are not used.
5 FREQuency.
The bit is set if frequency measurement is invalid due to poor signal quality.
6 to 14 These bits are not used.
15 This bit is always 0.
STATus:QUEStionable:CURRent Register
This register comprises information about overload/underload states that may occur if the
input current channel range is exceeded or the input signal is too low. It can be queried by
the STATus:QUEStionable:CURRent:CONDition? and
STATus:QUEStionable:CURRent[:EVENt]? commands.
Table 2-5. STATus:QUEStionable:CURRent Register Bits
Bit No. Description
0 INPut1 OVERrange
1 INPut3 OVERrange
2 INPut5 OVERrange
3 INPut7 OVERrange
4 INPut9 OVERrange
5 INPut11 OVERrange
6 to 7 These bits are not used.
8 INPut1 UNDERrange
9 INPut3 UNDERrange
10 INPut5 UNDERrange
11 INPut7 UNDERrange
12 INPut9 UNDERrange
13 INPut11 UNDERrange
14 This bit is not used.
15 This bit is always 0.
STATus:QUEStionable:VOLTage Register
This register comprises information about overload/underload states that may occur if the
input voltage channel range is exceeded or the input signal is too low. It can be queried
by the STATus:QUEStionable:VOLTage:CONDition? and
STATus:QUEStionable:VOLTage[:EVENt]? commands.