Fluke NORMA 4000 Operators, User Manual, Page: 144 / 184

Remote Control
Users Guide
4-96
STATus:OPERation:ENABle <value>
Description
Sets the enable mask that allows true conditions in the event register to be reported in the
summary bit. If a bit is 1 in the enable register and its associated event bit transitions to
true, a positive transition will occur in the associated summary bit. The command accepts
parameter values of either format in the range 0 through 65535 (decimal) without error.
The query response format is <NR1>.
Parameter(s)
bit 2 Ranging (changing range).
bit 3 Sweeping (memory recording in progress).
bit 5 Waiting for trigger.
bit 8 Synchronized (if sync source changes, there is a glitch).
bit 10 Averaging (averaging in progress, at the end of each averaging cycle, there is a glitch).
bit 12 Spectrum CALCulation in progress.
*RST state
0
Example(s)
STAT:OPER:ENAB 5948
STAT:OPER:ENAB? Response:
5948
Invalidates
-
Invalidated by
-