Fluke NORMA 4000 Operators, User Manual, Page: 142 / 184

Remote Control
Users Guide
4-94
Invalidates
-
Invalidated by
-
STATus:OPERation:PTRansition <value>
Description
Sets the positive transition filter. Setting a bit in the positive transition filter shall cause a
0 to 1 transition in the corresponding bit of the associated condition register to cause a 1
to be written in the associated bit of the corresponding event.
Parameter(s)
bit 2 Ranging (changing range).
bit 3 Sweeping (memory recording in progress).
bit 5 Waiting for trigger.
bit 8 Synchronized (if sync source changes, there is a glitch).
bit 10 Averaging (averaging in progress, at the end of each averaging cycle, there is a glitch).
bit 12 Spectrum CALCulation in progress.
*RST state
0
Example(s)
STAT:OPER:PTR 5948
STAT:OPER:PTR? Response:
5948
Invalidates
-
Invalidated by
-
STATus:OPERation:NTRansition <value>
Description
Sets the negative transition filter. Setting a bit in the negative transition filter shall cause a
1 to 0 transition in the corresponding bit of the associated condition register to cause a 1
to be written in the associated bit of the corresponding event.