Mounting
HyPower-Geko
40
FläktGroup DC-2014-0022-GB 2018-05/R5 • Subject to modifications
4.4.9 Installation of condensate tray
4.4.10 Assembly of auxiliary drain pan
User instructions!
This notice only concerns the unit in cooling operation.
The condensate tray is always supplied separately and is to be installed before unit
assembly.
The condensate drain outlet of the condensate tray must always be on the heat
exchanger connection side!
Pos. 1:
Coil drip tray
Pos. 2:
Fastening screws (4 pcs)
Pos. 3:
Arrester straps
Mount the condensate tray (Pos. 1) on the
opposite side of the heat exchanger connection
and fasten with 4 screws (Pos. 2).
Fig. 4-17: Assembly of condensate tray
Pos. 1:
Auxiliary drain pan
Pos. 2:
Screw, nut (4 pcs)
Pos. 3: Support (2 pcs)
Assemble the additional condensate tray (Pos.
1) by hanging it and fastening 2 supports (Pos.
3) using 4 screws and nuts (Pos. 2).
Fig. 4-18: Assembly of auxiliary drain pan