HyPower-Geko
Safety and User Instructions
FläktGroup DC-2014-0022-GB 2018-05/R5 • Subject to modifications
9
The HyPower-Geko may only be operated indoors.
The HyPower-Geko is designed for wall and ceiling installation.
1.7
Improper use
The HyPower-Geko may not be operated:
– for handling outdoor air,
– in areas subject to explosion risk,
– in wet areas or
– in locations with high dust levels or aggressive air.
1.8
Safety regulations and codes
When carrying out installation, commissioning, maintenance and service of the Flex-
Geko units, all local safety regulations and codes as well as generally established tech-
nical practices must be followed.
1.9
Modifications and changes
No changes, add-ons or modifications may be performed on the HyPower-Geko air
treatment unit or its components.
Changes or modifications of the Flex-Geko unit will invalidate the CE conformity and
render all warranty claims null and void.
1.10 Spare parts
Only original FläktGroup spare parts are allowed, since FläktGroup is not liable if third-
party spare parts are used.
Risk of damage to the unit!
In open systems (e.g. when using well water), used water should additionally be
cleansed of suspended matter using a filter to be installed at the inlet. Failure to do
so could result in a risk of erosion by suspended matter (consider the limit values
specified in Tab. 1-1).
Also ensure that the unit is protected from dust and other substances that can cause
acidic or alkaline reaction with water (aluminum corrosion).
It is not allowed to use HyPower units, in particular with a cooling function, for suction
of kitchen exhaust air containing organic acids, e.g. vinegar, formic acid or materials
containing aldehyde (e.g. cinnamic aldehyde). This can lead to corrosion of alumin-
ium fins. As a consequence unpleasant odours may occur.
User instructions!
The unit is considered to be used in an improper manner if it is applied for other pur-
poses or a purpose that is not covered by the scope of the given operation manual.
The manufacturer or supplier is not liable for any resulting damage; the user alone
bears the full risk.
The operator is responsible for proper use.
Proper use also stipulates the observance of the operation manual and the inspec-
tion and maintenance conditions defined by FläktGroup.
Risk of personal injury!
Improper use can cause personal injury and material damage.