Festo MSE6-C2M, Operating Instruction

Page: 68 / 104

68 Festo — MSE6-C2M — 2022-08b
Parameterisation
Function number Changeable module parame-
ters Function
m = module
number 0 Q V P2 DP2 REG DI DO
4828
+ m * 64 + 0 Pm.0: monitoring
Bit 0: SCS, short-circuit/over-
load in sensor supply – – – – – n –
Bit 1: SCO, short circuit/over-
load at outputs – – – – – –
n
Bit 2: undervoltage U
Out/A
– – – – n – n
Bit 6: limit values
n
–
n n
– – –
Bit 7: parameters n n n n n – –
4828
+ m * 64 + 7 Pm.7: limit value startup
n
–
n
– – – –
4828
+ m * 64 + 8 Pm.8: units
Bit 0 … 1: pressure – –
n n n
– –
Bit 2 … 3: flow rate n – – – n – –
Bit 4 … 5: consumption – n – – – – –
Bit 6 … 7: flow rate standard n n – – n – –
4828
+ m * 64 + 9 Pm.9: energy-save functions, are not currently supported
Bit 0: energy-save function
DO0 – – – – – – –
Bit 1: energy-save function
DO1 – – – – – – –
Bit 2: energy-save function
24VS – – – – – – –
Bit 3: energy-save function
status LEDs – – – – – – –
Bit 4: energy-save function
display – – – – – – –
4828
+ m * 64 + 10 Pm.10: pressure change
sample time – – –
n
– – –
4828
+ m * 64 + 11 … 12 Pm.11 … 12: flow rate, upper
limit value n – – – – – –
4828
+ m * 64 + 13 … 14 Pm.13 … 14: upper limit value
pressure – – n – – – –