Festo HSP AE Series, Manual

Page: 57 / 174

3. Installation
3−3
Festo P.BE−HSP−AE−IO−EN en 0510NH
3.1 Notes on installation
Warning
Sudden unexpected movement of the connected actuators
and uncontrolled movements of loose tubing can cause
injury to human beings or damage to property.
Before carrying out installation and maintenance work,
switch off the following:
the compressed air supply of the connected components
the operating voltage supply.
You can thereby avoid:
unexpected movements of the connected actuators
non−defined switching states of the electronic
components.
Make sure that the moving pneumatic tubing and electric
cables are laid correctly (example see Fig.3/1):
·
Lay the cables and tubing upwards along the vertical
guide rail.
·
Fasten the cables and tubing with cable binders as
follows:
on the cable binder support of the universal adapter
or pass them through the two cable channels of the
universal adapter,
on the cable binder support of the cross guide.
·
Pass the cables and tubing through the hole in the base
plate or use protective tubing.