Festo HSP AE Series, Manual

Page: 139 / 174

6. Operation and maintenance
6−7
Festo P.BE−HSP−AE−IO−EN en 0510NH
6.2 Instructions on care and maintenance
·
Follow the maintenance instructions for the components
used. The motor units are maintenance−free during the
specified service life.
·
If the handling module or the motor unit is defective:
Send the handling module to Festo for repairs.
·
If the handling module is dirty, clean the exterior with a
soft cloth.
After commissioning, adjust the silencers (rubber bffers) so
that in dynamic operation there is just a metallic impact and
the noise is kept as low as possible. If the impact noises be
come loud during operation, the rubber buffers should be
readjusted.
·
Check regularly the rubber buffers and the spring
clamping elements for wear.
Testing Spring clamping element Rubber buffer
Test cycle Every 2 million strokes
(approx. every 2 months)
*)
Every 2 million strokes
(approx. every 2 months)
*)
Signs of wear Play of the vertical guide rail in
the end positions in a horizontal
direction Loud knocking
Replacement cycle After 5 million switching cycles Every 10 million strokes
(approx 1 year)
*)
*)
At 0.5 Hz in dual operation mode
·
Check to see if more frequent tests are required.
This may be the case with:
high temperatures
excessive dirt
when there are fats solvent fluids or fumes in the
vicinity.