Festo HSP AE Series, Manual

Page: 135 / 174

6. Operation and maintenance
6−3
Festo P.BE−HSP−AE−IO−EN en 0510NH
6.1 Important user instructions
Note the following instructions and recommendations during
operation:
Warning
Damage to or impairment of the mechanical components
·
Make sure that:
nobody can place his/her hand in the positioning
range of the moveable mass
there are no objects in the positioning path.
·
Make sure that the handling module is set into motion
only when the protective cover or screen is fitted.
Subsequent adjustment
After commissioning, adjust the stop cushioning so that in
dynamic operation there is just a metallic impact and the
noise is kept as low as possible.
Caution
If mechanical modifications have been undertaken since
commissioning, the reference system and the end posi
tions must be taught again. Carry out the following com
missioning steps:
after turning/swivelling the motor unit (type HSP−...−GE),
after setting the y−stroke,
after setting the z−stroke,
if the load changes, repeat the test taking the modified
work load into consideration.