Festo HSP AE Series, Manual

Page: 155 / 174

A. Technical appendix
A−3
Festo P.BE−HSP−AE−IO−EN en 0510NH
A.1 Technical specifications
General information HSP−12/16−AE−... HSP−25−AE−...
Protection class as per EN60529 Handling module: IP40
Motor unit: IP54
Relative humidity 0 to 95 %, non−condensing
Temperature range
Operation
Storage/transport 0 ... +50°C
−25 ... +60°C
Vibration As per DIN/IEC 68/EN60068 part 2−6, severity 2:
0.35mm path at 10...60 Hz
5g acceleration at 60...150
Shock As per DIN/IEC 68/EN60068 part 2−27 severity 2:
±30 g at 11ms duration
5 shocks in each direction
Electromagnetic compatibility
1)
EMC interference emission
EMC interference immunity See conformity declaration (www.festo.com)
Protection against electric shock Protection against direct and indirect contact as per
IEC/DIN EN 60204−1 by PELV circuits
(ProtectedExtra−Low Voltage)
Rotary position encoder Optical encoder
No. of increments/revolutions 500
Temperature monitoring Silicon absolute temperature sensor
Switch−off at temperatures > 70 °C
Display resolution 128 x 64 pixels
Type of motor fastening Can be screwed on or clamped to the gear flange
Gear type Planetary gear
Gear reduction 6.752 (7:1); single−stage 13.73 (14:1); 2−stage
1)
The device is intended for industrial use.
The maximum permitted I/O signal cable length is 30 m.