Festo 174335, Electronic Manual

Page: 94 / 184

4. Commissioning
4-28
Festo P.BE-VIFB13-03-EN en 0003c
copied the Device data bases as in step 1 of the prepara-
tions).
2. Click with the left-hand mouse button on the symbol of the
valve terminal
2
. Keep the mouse button pressed and drag
the symbol to the PROFIBUS line on the DP master
3
.
The symbol of the valve terminal appears.
4
.
(Prerequisite: You have copied the symbol file as in step 2
of the preparations).
3. Double click on the symbol of the valve terminal
4
.
The mask “Slave Properties” appears
5
.
4. Select the slave address identical to the selected setting on
the rotary/DIL switch (see chapter 3.2.4) in the slave and
confirm this.
This concludes the station selection.
Configuration with COM PROFIBUS 5.0
Prerequisites:
– Device data base exists in the directory of your pro-
grammer/PC
– The mask “Bus parameter” has been processed (bus pro-
file, baud rate)
– PROFIBUS address has been assigned (see above)
– Station type “FESTO type 03 FB13” has been selected
(see above)
Configuring Access the mask “Configure”:
1. Click with the right-hand mouse button on the symbol of the
Festo valve terminal. Click on “Configure” in the menu which
now appears.
The mask “Configure” appears (Fig. 4/9).