Festo 174335, Electronic Manual

Page: 104 / 184

4. Commissioning
4-38
Festo P.BE-VIFB13-03-EN en 0003c
1. Click on the catalogue symbol
1
. This opens the Hard-
ware catalogue.
2. In the hardware catalogue mark the station type “FESTO
type 03 FB13”
2
(\PROFIBUS-DP\Additional FIELD DE-
VICES\VALVES) with the left-hand mouse button.
The slave type “VALVES” appears under folder “Addi-
tional FIELD DEVICES ”when you copy the Device data
base
(see step 1 of the preparations).
3. Hold the left-hand mouse button pressed down and drag
the cursor to the graphic PROFIBUS line on the DP master
3
(drag and drop).
The mask “Properties - PROFIBUS node” appears
4
.
4. Select the station (PROFIBUS) address identical to the
selected setting on the rotary/DIL switch in the slave (see
chapter 3.2.3) and confirm this with OK
5
.
The symbol of the valve terminal appears on the
PROFIBUS line (see Fig. 4/15).
Configuration STEP 7 with HW Config
Prerequisites:
S
Device data base exists in the directory of your pro-
grammer/PC
S
HW Config has been accessed
S
DP master in rack is active
S
Features of the “DP master” are processed
S
Station type “FESTO type 03 FB13” selected
S
Features of the “DP slave” processed – station (slave)
address assigned.