IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Typical Antenna Configuration
Page 36 of 36
Afterwards set the operating power, Transponder Parameters and ISO Host Mode:
Step
Action
Note
1
Select “Configuration”
2
Air Interface:
“Output -Power” = 4W
„Multiplexer Enable“
„1 Input (Single Mode)“
„No of Output Channels „
(4 = one aisle)
(6 = two aisles)
(8 = three aisles)
„Antenna Active Time“ 100 x
5ms
“Receiver Channel” Upper and
Lower Sideband
3
Set by clicking on „Apply“.
4
Transponder:
Configure the parameters as
following:
„Driver“ – here ISO 15693
„Anticollision“ – enable
„No of Timeslots“ – 1 timeslot
„Data Coding“ – 1 of 4
„AFI“ – Disabled
Note: National RF regulations may require different settings (see 9
Reader Configuration in Accordance with National RF Regulations).
5
Set by clicking on „Apply“.
6
Operating Mode:
For antenna tuning the reader has to
be set to „Host Mode“.
