![background image](http://html2.mh-extra.com/html/feig-electronic/id-isc-ant1710-690-crystal-gate-excellence/id-isc-ant1710-690-crystal-gate-excellence_installation-manual_3878650031.webp)
IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Typical Antenna Configuration
Page 29 of 29
Basically X13 GPC-out of the terminal boards of all used antennas must be connected from antenna to
antenna 1:1 in parallel.
The coax cables have fixed lengths and must not be shortened and therefore need to be tied into small loops
(see Fig. 19). Tie all cables as far away from the antenna conductor as possible. The cables must never
touch the antenna conductor. Unused cable lengths (e.g. of interface cable) should not be placed in the area
above the reader and multiplexer. The power supply should not be placed in the Type A antenna.