![background image](http://html2.mh-extra.com/html/feig-electronic/id-isc-ant1710-690-crystal-gate-excellence/id-isc-ant1710-690-crystal-gate-excellence_installation-manual_3878650048.webp)
IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Typical Antenna Configuration
Page 46 of 46
Step
Action
Note
antenna
7
Set by clicking on „Apply“.
8
Transponder
If the alarm should occur by a
transponder with valid AFI byte,
you have to configure the reader as
follow:
ISO-15693 – Selection Mask Set
“Enable AFI”
Set the value for the AFI in field
“AFI1” (e.g. 01)
Note:
Up to four different AFI
values could be set.
9
Operating Mode
If the alarm should occur by an
EAS, you have to configure the
reader as follow:
Set “EAS”
10
Set by clicking on „Apply“