![background image](http://html2.mh-extra.com/html/feig-electronic/id-isc-ant1710-690-crystal-gate-excellence/id-isc-ant1710-690-crystal-gate-excellence_installation-manual_3878650049.webp)
IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Typical Antenna Configuration
Page 47 of 47
7.5.4 Programming a Transponder with the AFI Byte
If the transponders will remain on the object when leaving the storage location, they must first be disabled.
This is generally done by writing to a particular area of the transponder.
The AFI byte (Application Family Identifier) is useful for this purpose as it is included in nearly all transponder
models of the ISO 15693 family. To disable the transponder, simply write a different code to it than for valid
transponders that trigger an alarm.
Step
Action:
Note:
1
Select „Commands“
2
Place the Transponder in the
antenna field (Antenna 1)
Select [0x01] Inventory
Mode: “New Inventory Requested “
3
Read UID by clicking on „Send“
4
The serial number, DSFID and
Transponder Type HPDAre
displayed in a window.
Write down the serial number of the
Transponder
5
Select „[0x27] Write AFI“
ADR:
1: addressed
Serial Number:
Select Transponder UID
AFI:
Desired AFI Number (not equal to
00)
6
Write AFI byte on to the
transponder by click on „Send“