IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Typical Antenna Configuration
Page 33 of 33
7.3.5 Interface Connections
7.3.5.1 LAN / TCP/IP
The reader has an integrated 10/100 Base-T network port for an RJ-45 connector. The connection is made
to X1 and has an automatic “Crossover Detection” according to the 1000 Base-T Standard.
Fig. 23: LAN interface for host communication
With structured shielded cabling CAT-5 cables should be used. This ensures reliable operation at 10 Mbps
or 100 Mbps.
The prerequisite for using TCP/IP protocol is that each device has a unique address in the network. All
readers have a factory-set IP address.
Network
Address
IP-Adresse
192.168.10.10
Subnet-Mask
255.255.255.0
Port
10001
DHCP
OFF
Table 8 Standard factory configuration of the Ethernet connection
NOTE:
The Reader TCP/IP interface has a DHCP option.
For more information on the interfaces, refer to the manual M81010-xe-ID-B of the reader.
X1
