IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Installation Gate People
Counter
Page 61 of 61
8
The sensitivity of the connected
radar modules could be set in
-Peripheral Device Commands
-People Counter
-at Busaddress 1 and 2
-Byte 11:
00 = Low
05 = Middle
0A = High
0F = Very high (Default)
First “Read” out actual setting of
sensitivity.
If needed change to new
sensitivity by “Write” the new
value into the GPC.
A “People Counter Reset”
command must be sent to
confirm the change, otherwise
the sensitivity will not change.
Test: People Counter
9
Select „Commands“
10
Select Command
- „Get Reader Info“ -
Peripheral Devices
11
Confirm with „Send“
Number of Devices should be 1
12
Select Command
„Set People Counter Values“
13
Confirm with „Send“
1
.
2
.
