![background image](http://html2.mh-extra.com/html/feig-electronic/id-isc-ant1710-690-crystal-gate-excellence/id-isc-ant1710-690-crystal-gate-excellence_installation-manual_3878650033.webp)
IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Typical Antenna Configuration
Page 31 of 31
Fig. 20: Unused coaxial cables must be fixed in antenna Type B
7.3.3 Setting the Multiplexer
The jumpers JP11-JP18 should be set (factory setting) as shown. For more information on setting the
ID ISC.ANT.MUX.M8 Multiplexer, refer to the corresponding installation manual (M90700-xde-ID-B).
Fig. 21: Jumper positions and antenna connections
Antenna 1: Type A: Lower loop is connected by default with output 1 and upper loop with output 2 of the
multiplexer (orange).
Antenna 2: Type B: Lower loop has to be connected to output 3 and upper loop to output 4 of the multiplexer
(blue)
Antenna 3: Type B: Lower loop has to be connected to output 5 and upper loop to output 6 of the multiplexer.
(red)
Antenna 4: Type B: Lower loop has to be connected to output 7 and upper loop to output 8 of the multiplexer.
(pink)
2 ANT
Lower Loop Upper Loop
1. ANT
Lower Loop Upper Loop
3 ANT
Upper Loop Lower Loop
4. ANT
Upper Loop Lower Loop