background image

OPERATING INSTRUCTIONS

DIGITAL  PROCESSORS DP-0202

DP-0204

CAUTION

TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE  COVER.

NO USER SERVICEABLE PARTS INSIDE.
REFER 

SERVICING TO QUALIFIED

SERVICE PERSONNEL

THE LIGHTNING FLASH WITH
ARROWHEAD WITHIN A TRIANGLE IS

INTENDED TO TELL THE USER THAT
PARTS INSIDE THE PRODUCT ARE A
RISK OF ELECTRIC SHOCK TO
PERSONS.

THE EXCLAMATION POINT WITHIN A
TRIANGLE IS INTENDED TO TELL THE

USER THAT IMPORTANT OPERATING

AND SERVICING INSTRUCTIONS ARE

IN THE PAPERS WITH THE

APPLIANCE.

CONTENTS

1. GENERAL DESCRIPTION  . . . . . . . . . . . . . . . . . . . . . . 2  

6. PERSONAL COMPUTER CONNECTIONS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

6, 7

2. FEATURES 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2

7. UNIT ID NUMBER  SETTING  . . . . . . . . . . . . . . . . . . . . 8

3. HANDLING PRECAUTIONS  . . . . . . . . . . . . . . . . . . . . . .  2

8. USING THE MEMORY I/O CONNECTOR  . . . . . . . . . .   9

4. SIGNAL PROCESSING FUNCTION  . . . . . . . . . . . .  2

9. RECALLING THE PATTERN MEMORIES. . . . . . . . . . . . 10

5. NOMENCLATURE AND FUNCTIONS

[FRONT PANEL] 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

3

   

10. SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

[FRONT POCKET]  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4
[REAR PANEL]

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

5

  11. APPEARANCE 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12

Please follow the instructions in this manual to obtain the optimum results from these units.

We also recommend that you keep this manual handy for future reference.

TOA Corporation

Summary of Contents for DP-0202













Reviews: