![background image](http://html2.mh-extra.com/html/feig-electronic/id-isc-ant1710-690-crystal-gate-excellence/id-isc-ant1710-690-crystal-gate-excellence_installation-manual_3878650041.webp)
IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Typical Antenna Configuration
Page 39 of 39
Step
Action
Note
6
Activate antenna 2 with
command: „Function Unit
Commands - Multiplexer“
Parameter:
„Channel Select“
„Cascade Level = 1“
„Output Channel of Input 1
= 2“
7
Confirm with “Send”
8
Repeat Step 3 to 5 for every
further antenna
If the values are inaccurate, check the following:
•
Are all cables pulled tight and in good contact?
•
Are the ferrite ring cores installed on the antenna cable?
•
Are the cables routed as specified?
•
Are there other RFID systems installed nearby?
•
Are there large metal parts close to the antenna (distance < 1.0 m)?
•
Are there any devices nearby which may emit noise interferences (larger machines or wireless devices)?
•
Are there interferences from the power supply?
To determine which devices may interfere with the gate, briefly disconnect them from the power supply.