FE FRENIC-Multi series, Instruction Manual

Page: 47 / 196

3-5
Table 3.3 Continued
Monitor items
Display
sample on
the LED
monitor *1
LED indicator
„
: on,
†
: off
Unit
Meaning of displayed value
Function
code E43
PID command
*3, *4
1*0*
†
Hz
†
A
†
kW
－
10
PID feedback
amount *3, *5
)0*
†
Hz
†
A
†
kW
－
PID command/feedback amount
transformed to that of virtual
physical value of the object to be
controlled (e.g. temperature)
Refer to function codes E40 and
E41 for details.
12
Timer
(Timer operation) *3
50 †
Hz
†
A
†
kW min
Remaining time of timer opera-
tion
13
PID output *3, *4
10**
†
Hz
†
A
†
kW %
PID output in % as the
maximum frequency (F03)
being at 100%
For motor 2, read F03 as A01.
14
Load factor *6
50;
†
Hz
†
A
†
kW %
Load factor of the motor in % as
the rated output being at 100%
15
Motor output *7
)85
†
Hz
†
A
„
kW kW Motor output in kW 16
*1 A value exceeding 9999 cannot be displayed on the 4-digit LED monitor screen, so " "
appear instead.
*2 When the LED monitor displays an output voltage, the 7-segment letter
u
in the lowest digit
stands for the unit of the voltage "V."
*3 These PID related items appear only when the inverter PID-controls the motor according to a
PID command specified by function code J01 (=1, 2 or 3).
The Timer item appears only when the timer operation is enabled with function code C21.
When the PID control or timer operation is disabled, "----" appear.
*4 When the LED monitor displays a PID command or its output amount, the dot (decimal point)
attached to the lowest digit of the 7-segment letter blinks.
*5 When the LED monitor displays a PID feedback amount, the dot (decimal point) attached to the
lowest digit of the 7-segment letter lights.
*6 When the LED monitor displays a load factor, the 7-segment letter
;
in the lowest digit stands for
"%."
*7 When the LED monitor displays the motor output, the unit LED indicator "kW" blinks.