FE FRENIC-Multi series, Instruction Manual

Page: 84 / 196

5-9
(A code continued)
Code
Incre-
ment
Unit
Change
when
running
Data
copying
Default
setting
Refer to
page:
A14 Control Mode Selection 2 0:
－ －
N Y 0 -
1: Dynamic torque vector operation
2:
3:
4:
A15 Motor 2 (No. of poles) 2 to 22 2 poles N Y1
Y2
4
A16 (Rated capacity) 0.01
0.01
kW
HP
N Y1
Y2
Rated
capacity of
motor
A17 (Rated current) 0.00 to 100.0 0.01 A N Y1
Y2
Rated value
of Fuji
standard
motor
A18 (Auto-tuning) 0: Disable
－ －
N N 0
1:
2:
A19 (Online tuning) 0: Disable
－ －
Y Y 0
1: Enable
A20 (No-load current) 0.00 to 50.00 0.01 A N Y1
Y2
Rated value
of Fuji
standard
motor
A21 (%R1) 0.00 to 50.00 0.01 % Y Y1
Y2
Rated value
of Fuji
standard
motor
A22 (%X) 0.00 to 50.00 0.01 % Y Y1
Y2
Rated value
of Fuji
standard
motor
A23 (Slip compensation gain for driving) 0.0 to 200.0 0.01 % Y* Y 100.0
A24 (Slip compensation response time) 0.00 to 10.00 0.01 s Y Y1 0.50
A25 (Slip compensation gain for braking) 0.00 to 10.00 0.01 % Y* Y 100.0
A26 (Rated slip frequency) 0.00 to 15.00 0.01 Hz N Y1
Y2
Rated value
of Fuji
standard
motor
A39 Motor 2 Selection 0:
－ －
N 0
1: Motor characteristics 1 (HP rating motors)
3:
4: Other motors
A40 Slip Compensation 2 0:
－ －
N Y 0
(Operating conditions) 1:
2:
3:
A41 0.00 to 0.40 0.01
－
Y Y 0.20
A45 Cumulative Motor Run T ime 2 Change or reset the cumulative data
－ －
N N
－
A46 Startup T imes of Motor 2 Indication of cumulative startup times
－ －
Y N
－
Enable (Tune %R1 and %X while the motor is stopped.)
Enable (Tune %R1, %X and rated slip while the motor is stopped, and
no-load current while running.)
Enable during ACC/DEC and disable at base frequency or above
Y1
Y2
Dynamic torque vector operation with optional PG interface
V/f operation with slip compensation inactive
Disable during ACC/DEC and disable at base frequency or above
Disable during ACC/DEC and enable at base frequency or above
Data setting range
Enable during ACC/DEC and enable at base frequency or above
V/f operation with slip compensation active
V/f operation with optional PG interface
Motor characteristics 0 (Fuji standard motors, 8-series)
Motor characteristics 3 (Fuji standard motors, 6-series)
0.01 to 30.00 (where, P99 data is 0, 3, or 4.)
0.01 to 30.00 (where, P99 data is 1.)
Name
Output Current Fluctuation
Damping Gain for Motor 2