MECHANICAL BRAKES
Read section A and B completely prior to operation or repair of golf car
F-34
Pedal Bumper Adjustment
Loosen the bumper lock nut and adjust the bumper by rotating it (Ref Fig. F29). The brake pedal must
contact the pedal bumper when pedal is released and the dimension from the top of the pedal arm to the
setscrew heads in the kick-off cam should be approximately 1/4" - 3/8" (6 - 9.5 mm).
Tighten the lock nut to 12-14 ft/ Ibs (16-19 N·m).
Fig. F29
：
Pedal Bumper Adjustment
Parking Brake Release Linkage Removal and Replacement
Remove the cotter pin (2), washers (3) and bushings (4) from linkage rod (1). Remove the linkage rod
(Ref Fig. F30).
Inspect the bushings (4). If they are worn, replace them with new ones.
Assembly is in the reverse order of disassembly.
