SAFETY
Read section A and B completely prior to operation or repair of golf car
B-12
MODIFICATIONS TO VEHICLE
Do not modify the vehicle in any manner that will change the weight distribution of the vehicle.
Changes to the weight distribution or the center of gravity may make the vehicle unstable or
prone to roll over which could result in injury or death to the operator or passenger (s).
GENERAL MAINTENANCE
When any maintenance procedure or inspection is performed, it is important that care be exercised to
insure the safety of the technician/mechanic or bystanders and to prevent damage to the vehicle.
Always read and understand the entire relevant manual section (chapter) before attempting any
inspection or service.
BEFORE SERVICING THE VEHICLE
Before attempting to inspect or service a vehicle, be sure to read and understand the following warnings:
Before working on vehicle, remove all jewelry (watches, rings, etc).
Be sure that no loose clothing or hair can become caught in the moving parts of the powertrain.
Use care not to contact hot objects.
Before attempting to operate or adjust the power train, the rear of the vehicle must be raised and
supported on jack stands.
Wear OSHA approved clothing and eye protection when working on anything that could expose the body
or eyes to potential injury. In particular, use care when working with or around batteries, compressed air
or solvents.
Always turn the key switch to 'OFF' and remove the key before disconnecting a live circuit.
When connecting battery cables, pay particular attention to the polarity of the battery terminals. Never
confuse the positive and negative cables.
Set the parking 'PARK' brake before performing any work on the vehicle.
If repairs are to be made that will require welding or cutting, the batteries must be removed.