![background image](http://html1.mh-extra.com/html/fairplay/zx/zx_manual_3214852039.webp)
FRONT SUSPENSION AND STEERING
Read section A and B completely prior to operation or repair of golf car
C-2
Additional hardware that is removed must always be installed in ins original position unless otherwise
specified. Non-specified specifications are as shown in the table contained in Section A.
To prevent possible injury or death, follow the lifting procedures in Section B of this manual.
Always place chocks in front and behind the rear wheels. Test the stability of the vehicle on the
jack stands before starting any repair procedure. Never get under a vehicle while it is supported
by a jack.
Front Shock Absorber Replacement
Tool List
Qty. Required
Air impact wrench ----------------------------------------- 1
Socket 17# -------------------------------------------------- 1
Open end wrench 17#------------------------------------ 1
Remove the nut (4) from the bottom of the shock absorber (1) at the front axle (2) (Ref Fig. C1).
Compress shock absorber to clear the mounting bracket.
Fig.C1: Front Shock Absorber Replacement
Loosen the nut (4) securing the both ends of the shock absorber to the vehicle frame and then rotate the
shock absorber while holding the nut in place with a wrench.
Remove the shock absorber.