GENERAL INFORMATION& ROUTINE MAINTEN NCE
Read section A and B completely prior to operation or repair of golf car
A-2
9SERIAL NUMBER PLATE LOCATION
The serial and manufacturing numbers are located on a plate at the bottom of cup holder the instrument
panel (Ref Fig.A1).
Design changes take place on an ongoing basis. In order to obtain correct components for the vehicle,
the manufacturing date and serial number must be provided when ordering service parts.
Fig.A1 Serial Number Plate Location
TOWING
Tow bars applicable to your vehicles may be ordered from FAIRPLAY Service Part Department.
Prior to towing operation, the Run-Tow/Maintenance switch of vehicles should be set to its position
“Tow/” in order to protect the motor and controller from damage.
The vehicle is provided with a 'Run-Tow' switch that is positioned underneath the passenger-side seat
(Ref Fig.A2). The Tow' position allows the vehicle to run freely without activating the alarm buzzer, free
of potential damage to the controller or motor. Check whether or not the towing vehicle to be towed is
set to the Tow' position already.
Do not ride on the towed vehicle in order to avoid personal injury or damage to towing
components.
Do not attempt to tow the vehicle by rope, chain, or any device other than tow bar approved by
the manufacturer.
It may be very dangerous to tow a disabled vehicle, and special attention should be paid.
Attempting to tow with devices other than an approved tow bar may result in severe personal
injury.