ACCESSORY WIRINGS
Read section A and B completely prior to operation or repair of golf car
L-5
ACCESSORY WIRINGS
After determining that there is power to the fuse panel, and the fuse is good/continue checking the circuit
using the procedures previously used to check the power supply, i.e. loose or rusted connections, bare
wires, continuity of the wiring from terminal to terminal, operating condition of switch, etc.
Use the wiring diagram (Ref Fig. L2) to check correct wiring and wire routing. If there is power at the.
fuse end of the wire, there must also be power at the other end of the wire at the switch or electrical
accessory, and eventually at the ground connection. Electricity must flow from the fuse panel through the
full length of the circuit to the ground connection. Any interruption of electricity flow must be corrected,
whether by repairing or replacing the wire, the switch or accessory.
