2 Connect each AC power cord to a power outlet on the switch (
see the following figure
).
Figure 82: Connecting an AC Power Cord to the BlackDiamond 8810 Switch
3 Make sure that each AC power cord is firmly plugged into the power outlet (
see the following
figure
).
Figure 83: AC Power Cord Plugged into the BlackDiamond 8810 Switch Power
Outlet
4 Align the AC power cord retainer over the AC power cord ends (
see the following figure
).
Figure 84: AC Power Cord Retainer Correctly Aligned
BlackDiamond AC Power Cord Retainers
BlackDiamond 8800 Hardware Install Guide
110
