2 Identify the locations for the mid-mount brackets.
Note
The BlackDiamond 8806 chassis has two possible positions for attaching the mid-mount
brackets.
3 Match the left and right brackets to the correct side of the chassis.
Each mid-mount bracket is clearly marked for placement on either the left or right side, as viewed
from the front of the chassis.
4 On each side of the chassis, use four of the provided screws to attach the appropriate mid-mount
bracket (see
the following figure
and
Figure 49: Attaching the Mid-mount Brackets to the
BlackDiamond 8810 Chassis
on page 72).
Figure 48: Attaching the Mid-mount Brackets to the BlackDiamond 8806 Chassis
1 = Alternate mid-mount bracket location
Installing the BlackDiamond 8800 Series Chassis
BlackDiamond 8800 Hardware Install Guide
71
