Figure 88: Securing the BlackDiamond 8806 AC Power Cord Retainer
1 = Retaining screw
4 Starting from the left, lay the first four power cords into the retainer (
see the following figure
).
Figure 89: Routing the Power Cords in the Retainer
5 Lay the last two power cords on top of the bottom four cords (
see the previous figure
).
Removing the BlackDiamond 8806 AC Power Cord Retainer
To remove the BlackDiamond 8806 AC power cord retainer:
1 Use a #2 Phillips screwdriver to loosen the captive screw located on each end of the AC power cord
retainer.
BlackDiamond AC Power Cord Retainers
BlackDiamond 8800 Hardware Install Guide
113
