Figure 12: 8500-G24X-e I/O Module
In the default configuration of the 8500-G24X-e I/O module, all ports:
•
Are added to the default VLAN as untagged
•
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The 8500-G24X-e I/O module has the following LEDs:
•
Module status
•
Module diagnostics
•
Port status
For information about the LEDs and their activity on the 8500-G24X-e I/O module, see
I/O Module
LEDs
on page 35.
8500-G48T-e I/O Module
The 8500-G48T-e I/O module (
see the following figure
) has 48 autosensing 10/100/1000BASE-T ports
that use standard RJ-45 connectors.
Figure 13: 8500-G48T-e I/O Module
You can add an optional S-POE daughter card to the 8500-G48T-e I/O module to provide Power over
Ethernet functions in this module. With an installed S-POE card, the ports can deliver PoE to an
attached device, in addition to the usual Ethernet connection, using a single cable. The 8500-G48T-e
I/O module supports the IEEE 802.3af PoE specification.
In the default configuration of the 8500-G48T-e I/O module, all ports:
•
Are added to the default VLAN as untagged
•
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
•
Operate in autonegotiation mode
BlackDiamond 8000 Series Modules
BlackDiamond 8800 Hardware Install Guide
24
