8
Installing BlackDiamond 8800
Series Module Options
Installing an S-POE Daughter Card
Removing an S-POE Card
Installing a Port Option Card in the 8500-MSM24, 8800-MSM48c, 8800-MSM96, or
8900-MSM128
Removing a Port Option Card
This chapter describes how to install optional components on BlackDiamond 8800 Series modules.
Installing an S-POE Daughter Card
The S-POE daughter card adds PoE functionality to the ports on the following I/O modules:
•
G48Tc
•
G48Te2
•
8500-G48T-e
•
8900-G48T-xl
You must remove the I/O module from the BlackDiamond 8800 Series switch before you install the S-
POE card.
You need the following tools and equipment to install an S-POE card:
•
ESD-preventive wrist strap
•
#2 Phillips screwdriver
•
3/8-inch flat-blade screwdriver
To install the S-POE daughter card:
1 Attach the ESD-preventive wrist strap to your bare wrist. If the metal end is not already connected,
connect it to the ground receptacle at the top left corner of the chassis.
2 Remove the I/O module from the BlackDiamond 8800 Series switch, following the instructions in
Removing a BlackDiamond 8000 Series Module
on page 95. Set the module on an ESD-preventive
work surface.
BlackDiamond 8800 Hardware Install Guide
103
