In the default configuration of the 8900-G48X-xl I/O module, all ports:
•
Are added to the default VLAN as untagged
•
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The 8900-G48X-xl I/O module has the following LEDs:
•
Module status
•
Module diagnostics
•
Port status
For information about the LEDs and their activity on the 8900-G48X-xl I/O module, see
I/O Module
LEDs
on page 35.
8900-G96T-c I/O Module
The 8900-G96T-c I/O module (
see the following figure
) has 96 10/100/1000BASE-T ports using MRJ21
connectors. Each connector provides six ports.
Figure 22: 8900-G96T-c I/O Module
1 = 10/100/1000BASE-T ports
3 = Port group LED selection button
2 = Module and port LEDs
In the default configuration of the 8900-G96T-c I/O module, all ports:
•
Are added to the default VLAN as untagged
•
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
•
Operate in autonegotiation mode
A push-button switch at the right of the module front panel selects which of two port groups are
displayed by the port LEDs.
The 8900-G96T-c I/O module has the following LEDs:
•
Module status
•
Module diagnostics
•
Port status
For information about the LEDs and their activity on the 8900-G96T-c I/O module, see
I/O Module
LEDs
on page 35.
BlackDiamond 8000 Series Modules
BlackDiamond 8800 Hardware Install Guide
32
